Motorized (Belt Drive) Ultraron

Motorized (Belt Drive) Ultraron

The motorized ULTRARON (Gear Reduction Belt - Drive) has the same accuracy as the manual ULTRARON. Motorized units can be controlled to suit inspection, grinding or other applications. Constant or variable speeds can be maintained. The motorized ULTRARON may be readily disengaged from the drive unit when desired and rotated manually, for part set-up.

The table drive includes a variable speed, solid state AC to a filtered DC output for cooler motor operation, longer brush life, lower audible noise, and wider speed range conversion system. The DC drive motor is coupled to the rotary table by gearing and a timing belt. Speeds are adjustable manual using speed pot mounted on the enclosure, from top speed down to ½ of the top speed. There is also a rotary switch for direction as well as a toggle switch to turn AC power on/off. The table can also be supplied with extended top plate sizes.

Rotary Table Dimensional Info
MOTORIZED ULTRARON (GEAR REDUCTION BELT - DRIVE) DIMENSIONAL INFORMATION
Table "A" "B" "C" "D" "E" "F" "G" "H" "I" "MH" "J" "K" "L" "M"
UR9-00003 9"
[228.6]		 6.50"
[165.1]		 12.25"
[131.15]		 19.75"
[501.56]		 8.750"
[222.25]		 4.687"
[119.06]		 5.500"
[139.70]		 3/8 SOC. HD. CAP SCR. 3/8 P.F. DOWEL 4"
[101.6]		 .38"
[9.65]		 1/4 - 20 3
6
6		 3" [76.20]
5" [127.00]
8" [203.20]
UR12-00003 12"
[304.8]		 6.50"
[165.1]		 13.75"
[349.25]		 23.12"
[587.25]		 10.500"
[266.70]		 6.250"
[158.75]		 6.250"
[158.75]		 3/8 SOC. HD. CAP SCR. 3/8 P.F. DOWEL 6"
[152.4]		 .50"
[12.7]		 1/4 - 20 3
6
6
4		 3" [76.20]
5" [127.00]
11" [179.40]
10.25" [260.35]
UR18-00003 18"
[457.2]		 7.25"
[184.15]		 20.25"
[514.35]		 29.38"
[746.13]		 15.875"
[403.23]		 9.812"
[249.24]		 9.437"
[239.71]		 3/8 SOC. HD. CAP SCR. 3/8 P.F. DOWEL 10"
[254.0]		 .50"
[12.7]		 5/16 - 18 3
6
4
8 		5" [127.0]
10.75" [273.05]
15" [381.0]
16.5" [419.1]
UR24-00003 24"
[609.6]		 8.25"
[209.55]		 27.25"
[692.15]		 37.00"
[939.80]		 21.000"
[533.40]		 12.875"
[327.03]		 12.375"
[314.33]		 1/2 SOC. HD. CAP SCR. 1/2 P.F. DOWEL 13"
[330.2]		 .50"
[12.7]		 5/16 - 18 3
6
8
4
12		 5" [127.0]
10.75" [273.05]
16.5" [419.1]
16.875" [428.62]
22.25"[565.15]